رسائل ماجيستير
English
2007
NUMERICAL ANALYSIS OF HEAT TRANSFER AND FLUID FLOW OVER A RIGIDLY VIBRATING CYLINDER IN CROSS FLOW
Adil A. Al-Moosawy, Mohsen Gawy Hamza Al-Guboury
كلية الهندسة-جامعة بابل · العراق
A numerical, finite difference with time dependent grid approach has been utilized for solving the governing equations for forced convection around anisothermal surface of circular cylinder in cross flow. The cylinder oscillating in three direction transverse, inline and orbital.The results for local Nusselt number and local skin friction are obtained for Pr=2.7(air).The ranges of Reynolds, reduced frequency and dimension less amplitude are (32to 622),(2.2to 2.7)and(2.2to 2.1)respectively. From these results, the following conclusions can be drawn:1.The use of a time dependent grid technique leads to a successful finite difference simulation of moving boundary problems(oscillating cylinder in a viscous fluid).0.The interaction between the oscillation cylinder and vortex shedding from the cylinder dominates the state of the wake.3.For the range of conditions of this investigation, some of the local Nusselt numbers and the local skin friction coefficients were up to about 73 percent and 75percent larger during oscillations than when the cylinder was at rest.
2.For the range of conditions of this investigation, the oscillating velocity(that depends on reduced frequency "F" and dimension less amplitude"A" )of the cylinder is the major factor in the enhance of local Nusselt number and local skin friction. Also, the local Nusselt number is greater in case of orbital oscillating when compared with other cases.5.At the conditions used in the study,the entrainment process of the free stream into the wake is main reason to increase heat transfer rate.6.The large increase in heat transfer from the surface of oscillating cylinder can be correlated with the observation of vortices rolling-up close the base of the cylinder. The increase in heat transfer is believed to be result of energetic fluid of the vortices scrubbing away the normally stagnant and poor heat convecting fluid which normally resides at the base of the cylinder. 7.The use of forced oscillation cylinder is a good method of enhancing heat convection from a heated cylinder.Suggestions for Future Work 6.0 Following the conclusion of the present study, it becomes apparent that several important issues requires further investigation. The following points are suggested for future work:1.The numerical work on forced convection around oscillating cylinder should be extended to study, the effect of oscillation on mixed and free convection heat transfer from heated cylinder. 0.Solving the same problem by using another models such primitive variable or vorticity-velocity model.
3.studying the effect of oscillation on multi-cylinder(tube bundle)and in multi configurations(such staggered or inline cylinders).2.Solving the same problem with higher frequency, amplitude and Reynolds number going to the turbulent flow regions.5.Investigating the effect of oscillating cylinder on the characteristic of compressible fluid.