Design of Dual-Band a Wearable patch Antenna for 5G Applications
شهلاء ياسين يونس العبادي, محمد تايه كاطع
كلية الهندسة-جامعة بابل · العراق
The rapid development of wearable applications based on 5G networks has led to an urgent need for specific antenna types. These antennas must have low power consumption, small size, great flexibility, and other features.Thus, the microstrip antenna is the best choice for these applications. In this thesis, a dual band antenna has been presented for 5G wearable applications. The proposed antenna operates in 6GHz and 28GHz frequencies, which are within the 5G frequency bands. The antenna design is simulated and validated by two-simulation softwares: Computer Simulation Technology (CST-Studio) and High-Frequency Simulation Software (HFSS). The Arlon AD 250C, Rogers RT/droid 5880(tm), and FR4 materials are used as substrates, in addition to the copper as a patch and ground. The simulation results show that the Rogers RT/droid 5880(tm) material has the better performance compared to other materials. However, the FR4 material is used in the fabrication process due to the unavailability of the Rogers RT/droid 5880(tm) in the Iraqi materials. The propose antenna has been designed with four feeding methods: Microstrip line, Coaxial (coplanar feed), Proximity coupled, and Aperture coupled. The simulation results shows that the Aperture coupled method has the best results over the other methods. Where, the antenna parameters with the Aperture coupled method are determined as follows:S11 values are -69.2dB and 23.2dB at 6GHz and 28 GHz, respectively, in addition, VSWR values are 1.006 dB and 1.14 dB at 6GHz and 28 GHz, respectively. Furthermore, the gain and efficiency values are (3.72 dB & 65.7%) and (7.07 dB & 97.5%) for 6GHz and 28 GHz, respectively.These results and other are compared with some literature results and this comparison shows that the proposed antenna outperforms the previous works.The folding ability of the proposed antenna has been tested by bending it on cylinders with different radii. Where, the simulation results show that the folded antenna versions have the same performance as the original one. Finally, the fabrication results show the fabricated antenna has a problem due to the air gap between the antenna’s substrates, which left because the hardiness of the FR4 material. However, the performance of the fabricated antenna has been corrected by compressing the both substrates during the test process.