رسائل ماجيستير
English
2018
Molecular Level Simulations And Modeling Of Decontamination Of Heavy Metals From Groundwater Using Clay Minerals
Sahel N. Abduljauwad, حمزة مروان حمزة بيكاوي
كلية الهندسة-جامعة الملك فهد للبترول والمعادن · السعودية
The deficiency of water resources is a growing issue, primarily, in the arid and semi-arid environments, such as Saudi Arabia which depends on the groundwater as a primary source of the water supply. With the rapid industrial development in Saudi Arabia in the past decades, the potential of groundwater contamination - from the industrial wastes and byproducts - has increased markedly. The decontamination processes for such type of contaminants are usually sophisticated, time-consuming, and costly. Consequently, alternative remediation methods have become an indispensable need. Many studies have been carried out in this regard such as electrokinetic, thermal, microbial remediation methods, among others. The initiation of this research was to propose a method of remediation/decontamination of heavy metals from water by adsorption techniques on clay minerals. A continuous flow experiment, known as fixed-bed column chromatography, is used for this purpose. A mixture of natural sand and clay mineral, namely, Na-Montmorillonite (Na-MMT), is considered as the fixed-bed materials. The Na-MMT was selected because of it has high swelling potential (i.e., high specific surface area), and high imbalanced surface charges (i.e., higher attraction/adsorption). In order to achieve a continuous flow at desirable and practical rates, different mixtures of sand and Na-MMT (6 to 0.5 % of Na-MMT) is tried. The permeability of the mixture was found to be controlled by Na-MMT providing no flow or very slow. However, the mixture of sand + 0.5% Na-MMT is found to provide the required effluent flow. The sand, Na-MMT, and their mixture are comprehensively characterized prior being utilized for adsorption experiments. Thereafter, the mixture is placed in the fixed-bed chromatography and subjected to a continuous flow of distilled water contaminated with heavy metals; Cu(II), Pb(II) & Zn(II) in mono and competitive solutions at different initial concentrations. The effluent samples are collected along the elapsed time, and the residual concentrations are determined using inductively coupled plasma optical emission spectrometry (ICP-OES). Moreover, the Na-MMT samples are analyzed using scanning electron microscopy and energy dispersive X-ray analyzer (SEM-EDX) before and after the adsorption experiments. Finally, molecular-level Monte Carlo simulations for the Na-MMT and sand adsorption have been conducted through "Material Studio" package, and qualitative and quantitative comparisons between the simulations and experimental results are performed.