Delay Predication Model at Some Signalized Intersections in Hilla City
علي صلاح مهدي القزويني, نهلة يعسوب أحمد
كلية الهندسة-جامعة بابل · العراق
Suffering from Vehicles jam at intersections are a continuous in Hilla city occurrence due to the increasing volume of traffic. Utilizing traffic simulation software to look for appropriate control methods is an efficient solution to the problem. Different simulation programs produce various evaluation results. The aim of this study is on two simulation software (SYNCHRO10.0 and SIDRA 8.0 PLUS)for predicting total delay time at signalized intersections by using microsimulation software to calibrate data and using statistical software (SPSS) to create model. This study will investigate the main differences between the two programs and select program most representative of traffic movement at signalized intersections . Develop an empirical model for delay prediction at Signalized Intersections as a function of influence traffic and geometric features. Four signalized intersections(Zalatimo, Eishtar, Al-Thawra, Babal Mashhad )important were selected with different characteristics in Hilla city center. SYNCHRO10.0 and SIDRA 8.0 PLUS)for predicting total delay time at signalized intersections good correlation with field measurement values .Many variables affect the delay model including ( degree of saturation (v/c) ratio green to cycle (g/C) and total width of exit roadway of intersection for traffic departing straight divided by total width of lane groups departing to the same exit roadway, in the same phase (We/Ws).The minimum of g/c and large flow rate cause high v/c value (g/C) with delay time has an inverse relationship. Increasing (g/C) leads to decrease the delay. The ratio of total width of exit roadway of intersection for traffic departing straight forward to total width of lane groups departing to the same exit roadway at the same phase at stop line (We/Ws) appear to affect the delay. It is found that although SYNCHRO and SIDRA 8.0 PLUS delay overestimates delay at high ( v/c ) range, but it does not have a significant difference with the field delay at 95%confidence level. VII Field traffic volumes signal timings, phasing and control delay were measured during peak and off-peak periods using video recording technique. Geometric design elements were measured through a field survey and satellite image. A statistical approach is used to develop delay model (linear regression model with 95% confidence level).The statistical analysis indicates that both geometric and traffic variables have a significant effect on delay time. The regression model, developed to estimate delay, shows the good correlation with field values . The three main subjects included in this study; the first subject included a comparison of actual delay time with delay time produced by software program for all each arm. The second subject included software program delay values versus actual delay values after calibrating the Basic saturation flow rate for all arm. The third subject included Software validation observed delay versus Predicted Delay Finally, the selected software packages are used to evaluate the actual delay times of the various research cases and the corresponding values. It can be concluded that there are significant differences between the field-measured delay times and the corresponding calculated delay times using the selected software simulation. Results show that SYNCHRO10.0 software best software for prediction of the field delay time at signalized intersections (Zalatimo, Eishtar,Bab al-Mashhad) while SIDRA 8.0 PLUS software best for Al-Thawra intersection after the calibration process empirical model for predicting total delay time. This study can provide references for simulation software selection.