Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2014 fe86c3da-76d7-41c0-bcd9-ef549d6b6b43

Oil Removal From Produced Water Using Natural Materials

Taleb Ibrahim, Abdul Sami Gulistan

كلية الهندسة-الجامعة الأمريكية - الشارقة · الامارات

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

The oil and gas industry has had to deal with a massive amount of waste water as a bi-product of the exploration of oil and gas. This waste water referred to as produced water (PW) and the amount of PW increases with the well operation time and may increase to approximately 80%. The discharge of PW may lead to severe pollution of surface, soil and under-ground water. Oil-field-produced water contains organic and inorganic compounds. One commonly used technique to remove oil from PW is adsorption. In this work, pomegranate peel powder (PPP) is used as a low cost adsorbent for the removal of crude oil from simulated produced water (SPW) and real PW from oil and gas wells. Pomegranate peels (agricultural waste) were dried, crushed and washed with double distilled water and dried again. Characterized for surface morphology, elemental composition, functional groups and surface area using analytical equipment like SEM, EDS, FTIR, and BET isotherm respectively. EDS spectroscopy showed that the major elemental constituent in the bio-sorbent was carbon (up to 78%). However, oxygen, calcium, silicon and potassium were also observed in small quantities. Oil was removed from laboratory-produced water in a batch process at standard atmospheric conditions. The effect of contact time, adsorbent dosage, pH as well as temperature on the removal efficiency of oil was investigated. The optimum parameters for oil removal were: pH = 9.5, pomegranate = 2.33 g/L, contact time = 40.0 minutes and adsorption temperature = 55.0 C. The results showed that as the adsorbent dosage, pH and salinity of SPW are increased, the removal efficiency increased. The adsorption of crude oil by PPP was found to follow the Langmuir adsorption isotherm with an adsorption capacity of 555 mg/g. The adsorption kinetic of crude oil is best described by the pseudo-second-order kinetic model with a rate constant of 3.75 x 10-4 g/mg.min. These results render PPP an excellent adsorbent for the removal of oil from produced water with an oil removal efficiency exceeding 92% in 50 min.

التعريف والنوع

رقم الوثيقة
fe86c3da-76d7-41c0-bcd9-ef549d6b6b43
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
45958_1.pdf

بيانات النشر

ألقاب المؤلفين
[{"name_ar":" Taleb Ibrahim","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"Abdul Sami Gulistan","title_ar":"اعداد","title_en":"Preparation"}]
اللغة
English

المصدر والدورية

اسم المصدر
Oil Removal From Produced Water Using Natural Materials

المحتوى والصفحات

عدد الصفحات
0

إشراف وإعداد

الإشراف
Taleb Ibrahim
الإعداد
Abdul Sami Gulistan

الاقتباسات الببليوغرافية

APA

Taleb Ibrahim و Abdul Sami Gulistan. (2014). Oil Removal From Produced Water Using Natural Materials. أطروحة(رسائل ماجيستير). كلية الهندسة-الجامعة الأمريكية - الشارقة. الامارات .

MLA

Taleb Ibrahim و Abdul Sami Gulistan. Oil Removal From Produced Water Using Natural Materials. 2014. كلية الهندسة-الجامعة الأمريكية - الشارقة، رسائل ماجيستير.