تحضير جمل هلامية عضوية ذات اساس بوليميري وتوصيفها Organogels
Preparation and characterization of Organogels based on polymers
زين العابدين الدكنجي, يمن السيد سليمان الأتاسي
المعهد العالي للعلوم التطبيقية والتكنولوجيا · سوريا
الموضوعات
علوم تطبيقية وتكنولوجية
الملخص
يتوزع هذا البحث ضمن محورين رئيسيين: المحور الأول: تحضير نظم هلامية عضوية جديدة للتطبيقات الإيقاف النزفي (الهيماستاسيس) في المجال الطبي، حيث تم استعمال الكاربوپول 940 NF كعامل هلامي، والـ PEG-400 كحامل للطور العضوي. استُخدمت الكيتوسان والكاولين كعوامل هِيموستاتية عضوية وغير عضوية على التوالي. تم ضبط الخواص الريولوجية للهلامات باستعمال السيليكا النانوية. أبدت العينات سلوكاً لا-نيوتونياً مع ميزة ترقق بالقص (shear thinning). أُجري التحليل البنيوي والمورفولوجي والحراري للعينات. أظهرت العينات أداءً هيموستاتياً واعداً؛ فقد كان زمن التخثر للعينة المثلى 0.6 min، وكانت نسبة امتصاص الهيموغلوبين غير المتخثر لا تتجاوز 1.1% مقارنةً بـ 9.8 min و100% للدم الحر. وتفوقت العينات المحضرة على عينات تجارية مثل الضماد (Gauze) و®GELITA SPON اللذين سجلا زمن تخثر 5 min و3 min ونسبة امتصاص 84.95% و65.2% على التوالي. للمقارنة، حضّرنا أيضاً رغاوي بولي يوريثان محمّلة بعوامل هيموستاتية، فأظهرت هذه العيّنات خواص هيموستاتية جيدة لكن بأداء أقل بنسبة 37.5% مقارنةً بنظائرها الهلامية عند نفس نسب التحميل. المحور الثاني: تحضير تركيبتين من الوقود الهلامي. الأولى على أساس كحولي وبوجود الهيكسامين كمادّة طاقية، حيث بلغت طاقة الاحتراق 32.4 MJ/kg مقارنةً بـ 18.6 و29.4 MJ/kg لكل من المنتجين التجاريين AM® HEAT وHexamine Fuel Solid (Expedition Research LLC). التركيبة الثانية كانت دافعاً هلامياً مبنياً على الكيروسين، باستخدام الكاربوپول وSiO2 (ثاني أكسيد السيلكون) كعاملي جلّ عضوي وغير عضوي على التوالي. أظهرت الدراسة الريولوجية أن الدافع يظهر سلوكاً لا-نيوتونياً مع ترقق زائف بالقص (pseudo-plastic shear thinning). تم اختبار استقرار الدافع بالطرد المركزي. بلغت طاقة الاحتراق 46.8 MJ/kg.
روابط وملفات
التعريف والنوع
- رقم الوثيقة
- fc18583b-4218-479a-9aa7-da64304899af
- رقم العقد
- 0
- نوع الوسائط
- Crawler
- نوع المحتوى
- الرسائل العلمية
- صيغة المصدر
- رسائل ماجيستير
- نوع الملف
- pdf text
- أسماء الملفات
- 841105_1.pdf
بيانات النشر
- ترجمة العنوان
- Preparation and characterization of Organogels based on polymers
- ألقاب المؤلفين
- [{"name_ar":"زين العابدين الدكنجي","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"يمن السيد سليمان الأتاسي","title_ar":"اشراف","title_en":"Supervision"}]
- اللغة
- Arabic
المصدر والدورية
- اسم المصدر
- تحضير جمل هلامية عضوية ذات اساس بوليميري وتوصيفها Organogels
المحتوى والصفحات
- عدد الصفحات
- 0
- ترجمة الملخص
- This work is divided into two sections: In the first section, novel organogel systems for hemostatic applications have been prepared. Carbopol 940 NF has been used as a gelling agent, whereas polyethylene glycol (PEG-400) has been used as a carrier of the organic phase. Chitosan and kaolin are used as organic and inorganic hemostatic agents, respectively. The rheological properties of the gels were tuned using nano-silica. The samples exhibit non-Newtonian behavior with shear-thinning properties. Structural, morphological, and thermal characterizations of the samples have been performed. The samples showed promising hemostatic performance: the clotting time for the optimized sample was 0.6 min, and the absorbance percentage of the non-coagulated hemoglobin was 1.1%, compared with 9.8 min and 100% for free blood. The prepared organogels exceeded the performance of some commercial products, namely GELITA SPON® and Gauze: clotting times 3 and 5 min, and absorbance percentages 65.2% and 84.95%, respectively. For comparison, polyurethane foams loaded with hemostatic agents were also prepared. These samples showed good hemostatic properties but with a 37.5% decrease in performance compared with their organogel analogues at the same loading percentages. In the second section, two formulations of fuel gels have been prepared. The first one is based on alcohol in the presence of hexamine (a high-energy-density compound). The combustion energy was 32.4 MJ/kg, compared with 18.6 and 29.4 MJ/kg for the commercial products AM® HEAT and Hexamine Fuel Solid (Expedition Research LLC). The second formulation was a gelled propellant based on kerosene using Carbopol and silicon dioxide (SiO₂) as organic and inorganic gelling agents, respectively. The rheological study showed the propellant exhibits non-Newtonian behavior with pseudo-plastic (shear-thinning) properties. The stability of the propellant was investigated by centrifugation. The combustion energy was 46.8 MJ/kg.
- كلمات الباحثين
- هلام عضوي، هيماستاسيس، كيتوسان، كاولين، كاربوپول 940 NF، PEG-400، السيليكا النانوية، سلوك لا-نيوتوني، ترقق بالقص، رغاوي بولي يوريثان، وقود هلامي، هيكسامين، كيروسين، SiO₂، خصائص ريولوجية، استقرار الطرد المركزي، طاقة الاحتراق.
إشراف وإعداد
- الإشراف
- يمن السيد سليمان الأتاسي
- الإعداد
- زين العابدين الدكنجي
الاقتباسات الببليوغرافية
APA
MLA