Optimization of Friction Stir Welding Parameters of PP/AA5052 Hybrid Structures

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

Over the past decade, friction stir welding of dissimilar materials has attracted substantial attention since it can be used in various industrial applications such as shipbuilding, aerospace, automotive and robotics, and most of these applications require light weight, cost effective, clean, and relatively safe components. In this study the joining of metal to polymer in a hybrid joint using friction stir lap welding was investigated. An experimental setup was built in order to test the feasibility of welding AA5052 to polypropylene (PP) in a lap joint. To begin with, multiple screening experiments were conducted to identify the working envelope. After that a full factorial design with three levels of each process parameter was performed. Forces in three directions (axial, welding, and lateral), joint lap shear strength, and the temperatures at the advancing and retreating side were analyzed by varying rotational speed, traverse speed, and tilt angle. Sound hybrid joint was achieved, and it was found that increasing the rotational speed and tilt angle resulted in an increase of the joint strength, while increasing the traverse speed lead to a decrease in the joint strength. Moreover, microstructure analysis was done by using scanning electron microscope (SEM) and revealed that mechanical interlocking induced by the generation of metal hooks contributed to the strength and performance of the joint. Direct relationship was found between hook size on the advancing side and lap shear strength. Also, elemental mapping at Al-PP interface was done and discovered the existence of magnesium, aluminum, carbon, and oxygen.

روابط وملفات

التعريف والنوع

رقم الوثيقة

f48c3a27-523d-4ca6-a651-61baa3523150

رقم العقد

0

نوع الوسائط

Crawler

نوع المحتوى

الرسائل العلمية

صيغة المصدر

رسائل ماجيستير

نوع الملف

pdf text

أسماء الملفات

2282722_1.pdf

بيانات النشر

ألقاب المؤلفين

[{"name_ar":" Jamal Ahmad ","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"Fahad Almaskari ","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"Kamran Khan","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"Yasser Jamal Eddin Aldaghestani","title_ar":"اعداد","title_en":"Preparation"}]

اللغة

English

المصدر والدورية

اسم المصدر

Optimization of Friction Stir Welding Parameters of PP/AA5052 Hybrid Structures

المحتوى والصفحات

عدد الصفحات

0

كلمات الباحثين

Friction stir lap welding, mechanical interlocking, AA5052, PP, tilt angle, plunge depth.

إشراف وإعداد

الإشراف

Jamal Ahmad , Fahad Almaskari , Kamran Khan

الإعداد

Yasser Jamal Eddin Aldaghestani

الاقتباسات الببليوغرافية