Etude Des Transferts De Chaleur Et De Masse Dans Une Membrane De Pile À Combustible Pour Des Applications Basse Et Moyenne Température
Bachir Dadda, سعيد عبودي, عبدالرحمن غزال
كلية الفيزياء-جامعة العلوم والتكنولوجيا هواري بومدين - الجزائر · الجزائر
الموضوعات
علوم بحتة وطبيعية
الملخص
L’objectif de ce travail est d’établir un modèle mathématique et d’élaborer un code de calcul numérique simulant le phénomène de transport au sein d’une membrane d’une pile à combustible à membrane échangeuse de protons (PEMFC) et d’étudier ses performances sous l’influence de différents paramètres. La résolution de ce système a été réalisée numériquement par trois méthodes de discrétisation à savoir: les différences finies, les volumes finis et les éléments finis. Elles sont considérées comme les plus utilisées dans le traitement des problèmes de transfert de chaleur et de masse en mécanique des fluides. La résolution du système obtenu a permis d’étudier les variations de la température et de la concentration en eau au sein de la membrane en fonction des différents paramètres responsables du phénomène de transport et leur influence sur les performances d’une pile à combustible à travers les variations du potentiel.
روابط وملفات
التعريف والنوع
- رقم الوثيقة
- f26ca9ec-d021-4346-9397-ddc72fe3f8c7
- رقم العقد
- 0
- نوع الوسائط
- Crawler
- نوع المحتوى
- الرسائل العلمية
- صيغة المصدر
- رسائل دكتوراة
- نوع الملف
- word
- أسماء الملفات
- 1375591_1.docx, 1375591_2.pdf
بيانات النشر
- ألقاب المؤلفين
- [{"name_ar":"Bachir Dadda","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"سعيد عبودي","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"عبدالرحمن غزال","title_ar":"اشراف","title_en":"Supervision"}]
- اللغة
- French
المصدر والدورية
- اسم المصدر
- Etude Des Transferts De Chaleur Et De Masse Dans Une Membrane De Pile À Combustible Pour Des Applications Basse Et Moyenne Température
المحتوى والصفحات
- عدد الصفحات
- 0
- ترجمة الملخص
- The aim of this work is to establish a mathematical model and elaborate a CFD code to simulate the transport phenomenon within a membrane of a proton exchange membrane fuel cell (PEMFC) and then to study its performances under the influence of several parameters. The established model is an extension to two dimensional of a one dimensional transient model proposed by Brandon Eaton [52]. It is composed of a set of coupled equations governing the transport phenomena of species and heat. The resolution of the problem has been performed numerically using three numerical methods, such as; finite differences, finite volumes and finite elements, considered as the most used in heat and mass transfer and fluid dynamic problems. The resolution of the governing equations allowed us to investigate the temperature and the water concentration variations within the membrane in terms of the parameters responsible of the transport phenomenon, as well as their influence on the performance of a fuel cell through the potential variations. The analysis of the obtained results revealed that the developed model and CFD code present a powerful tool for the future investigations and a good agreement with the literature has been noticed. Through these results, the effect of some parameters, such as the convective and electrical forces as well as some cases of boundary conditions, on the behavior of the water concentration, of the temperature and the potential within the membrane, have been analyzed. In addition, these results have revealed the importance of these parameters in the performance improvement of a proton exchange membrane.
- كلمات الباحثين
- Membranes (technologie) , Modèles mathématiques , Piles à combustible , Thermocinétique
إشراف وإعداد
- الإشراف
- سعيد عبودي, عبدالرحمن غزال
- الإعداد
- Bachir Dadda
الاقتباسات الببليوغرافية
APA
MLA