Parametric freeform-based construction site layout optimization

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

Traditional approaches to the construction site layout problem have been focused mainly on rectilinear facilities where the importance proximity measures are mainly based on Cartesian distances between the centroids of the facilities. This is a fair abstraction of the problem; however it ignores the fact that many facilities on construction sites assume non-rectilinear shapes that allow for better compaction within tight sites. The main focus of this research is to develop a new approach of modeling site facilities to surpass limitations and inefficiencies of previous models and to ensure a more realistic approach to construction site layout problems. A construction site layout optimization model was developed that can suit both static and dynamic site layouts. The developed model is capable of modeling any rectilinear and non-rectilinear site shapes, especially splines, since it utilizes a parametric modeling software. The model also has the ability to mimic the “dynamic” behavior of the objects’ shapes through the introduction and development of three different algorithms for dynamic shapes; where the geometrical shapes representing site facilities automatically modify their geometrical forms to fit in strict areas on site. Moreover, the model provides different proximity measures and distance measurement techniques rather than the normal centroidal Cartesian distances used in most models. The new proximity measures take into consideration actual movement between the facilities including any passageways or access roads on site. Furthermore, the concept of selective zoning was introduced and a corresponding algorithm was provided; where the concept significantly enhances optimization efficiency by minimizing the number of solutions through selection of pre-determined movement zones on site. Soft constraints for buffer zones around the site facilities were developed as well. The site layout modeling was formulated on commercial parametric modeling tools (Rhino® and Grasshopper®) and the optimization was performed through genetic algorithms. After each of the algorithms was verified and validated, a case study of a real dynamic site layout planning problem was made to validate the comprehensive model combining all of the modules together. Different proximity measures and distance measurement techniques were considered, along with different static and dynamic geometrical shapes for the temporary facilities. The model produced valid near-optimum solutions, a comparison was then made between the layout that is produced with the model and the layout that would have been produced by other models to demonstrate the capabilities and advantages of the produced model.

روابط وملفات

التعريف والنوع

رقم الوثيقة

f0fdeca6-f094-4f5b-932a-a8aac376c9f7

رقم العقد

0

نوع الوسائط

Crawler

نوع المحتوى

الرسائل العلمية

صيغة المصدر

رسائل ماجيستير

نوع الملف

pdf text

أسماء الملفات

873780_1.pdf

بيانات النشر

ألقاب المؤلفين

[{"name_ar":"ابراهيم صلاح الدين محمود ابوطالب","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"خالد نصار اسامة حسنى ","title_ar":"اشراف","title_en":"Supervision"}]

اللغة

English

المصدر والدورية

اسم المصدر

Parametric freeform-based construction site layout optimization

المحتوى والصفحات

عدد الصفحات

0

إشراف وإعداد

الإشراف

خالد نصار اسامة حسنى

الإعداد

ابراهيم صلاح الدين محمود ابوطالب

الاقتباسات الببليوغرافية