Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2010 f0e0b9c3-c041-44cc-b8b0-535212066ddc

X-ray Radiographic Study of Simulated Voids – Like Defects in Aluminum Casting and Welded Joints in Steel

دراسة الفجوات المصنعة بهيئة عيوب بواسطة الأشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ

فرقد راشد سعيد الزبيدي, مازن فيصل محروك

كلية العلوم-جامعة النهرين · العراق

الموضوعات

علوم بحتة وطبيعية

الملخص

This project investigates the detection and evaluation of imperfections in internal structures of castings and welded joints by x-ray radiography. Optimum radiography conditions that lead to clear and high contrast image on the radiograph were studied.Equations derived earlier for finding the size and depth of defects in castings were used in this project to test their applicability to a wide range of geometrical parameters used in radiography.The importance of non-destructive testing NDT in industry is discussed. X-ray radiography being one of the NDT techniques, has some privilege over other techniques. For example, welded joints sometimes contain internal flaw or blowholes that may escape detection by other NDT techniques but can not escape detection by x-rays.Two kinds of samples are prepared for radiography. The first sample is aluminum casting through which two different sizes of steel spheres are included. This sample was radiographed from two opposite sides and the x-ray films were analyzed.The second sample is steel plates which are welded by arc welding and then radiographed  by x-rays.Imperfections in this sample such as incomplete root penetration,undercut and porosity were detected by x-ray radiography.Different conditions influencing the preparation and radiography of the above samples were studied. The prepared welded sample was radiographed three times for different high voltages 120,140,160) kV respectively with an exposure time of (80) second. The best quality image where the defects can be detected clearly if its size is (5%) of the radiographed object using (120) kV and (140) kV. Moreover the results show that the optimum film gradient was found at (140)kV and the contrast is better than obtained with (120)kV while darkening image was found at (160)kV.In field of the aluminum casting, the two equations were derived earlier proved their capabilities as a right method for identification each of size and depth of such defects in castings and welded joints.

التعريف والنوع

رقم الوثيقة
f0e0b9c3-c041-44cc-b8b0-535212066ddc
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
14493_1.pdf

بيانات النشر

ترجمة العنوان
دراسة الفجوات المصنعة بهيئة عيوب بواسطة الأشعة السينية لمصبوبة المنيوم ومفاصل لحام الفولاذ
ألقاب المؤلفين
[{"name_ar":"فرقد راشد سعيد الزبيدي","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"مازن فيصل محروك","title_ar":"اشراف","title_en":"Supervision"}]
اللغة
English

المصدر والدورية

اسم المصدر
X-ray Radiographic Study of Simulated Voids – Like Defects in Aluminum Casting and Welded Joints in Steel

المحتوى والصفحات

عدد الصفحات
0

إشراف وإعداد

الإشراف
مازن فيصل محروك
الإعداد
فرقد راشد سعيد الزبيدي

الاقتباسات الببليوغرافية

APA

فرقد راشد سعيد الزبيدي و مازن فيصل محروك. (2010). X-ray Radiographic Study of Simulated Voids – Like Defects in Aluminum Casting and Welded Joints in Steel. أطروحة(رسائل ماجيستير). كلية العلوم-جامعة النهرين. العراق.

MLA

فرقد راشد سعيد الزبيدي و مازن فيصل محروك. X-ray Radiographic Study of Simulated Voids – Like Defects in Aluminum Casting and Welded Joints in Steel. 2010. كلية العلوم-جامعة النهرين، رسائل ماجيستير.