Schoobrary رجوع
العودة إلى البحث
رسائل دكتوراة الفرنسية 2016 ee91ac8b-6b28-4e49-80f0-2bf53ca15779

Caractérisation des couches déposées par pulvérisation sur un verre sablé revenue par une couche transparente : application de la méthode sol gel

Hind Laouamri, M. Kolli, N. Bouaoudja

معهد البصريات والميكانيكا الدقيقة-جامعة فرحات عباس - سطيف1 · الجزائر

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

The aim of this work is to investigate the effect of acrylic coatings on the optical and mechanical properties of sandblasted soda–lime–silica glass.The obtained results show that the sandblasting alters the surface state. Accordingly, the optical transmission drops from its initial value (T = 91.4%) to much less lower values (T ~ 15%) which leads to a bad visibility and a small photovoltaic efficiency (89%) through the sandblasted glasses. The mechanical strength which was 80 MPa for the as-received glass drops down to 24 MPa after sandblasting. The acrylic coating deposited by spray has been found very effective in restoring the surface state by filling the sandblasting defects. It results in a near total recovery of the optical transmission (T ~ 89%) which is accompanied by a remarkable improvement in the visibility and the photovoltaic efficiency (98%) through these glasses.The deposition of the acrylic coating leads to a significant improvement of the impact fatigue resistance. It could reach nearly 200 shocks after coating. This value is very important to that of sandblasted glass (3 shocks) and as-received glass (13 shocks).Scratch tests carried out on the coated samples showed that the pre-treatment by HF acid improves the adhesion of the coating.

التعريف والنوع

رقم الوثيقة
ee91ac8b-6b28-4e49-80f0-2bf53ca15779
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل دكتوراة
نوع الملف
pdf text
أسماء الملفات
324624_1.pdf

بيانات النشر

ألقاب المؤلفين
[{"name_ar":"Hind Laouamri","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"M. Kolli","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"N. Bouaoudja","title_ar":"اشراف","title_en":"Supervision"}]
اللغة
French

المصدر والدورية

اسم المصدر
Caractérisation des couches déposées par pulvérisation sur un verre sablé revenue par une couche transparente : application de la méthode sol gel

المحتوى والصفحات

عدد الصفحات
0

إشراف وإعداد

الإشراف
M. Kolli, N. Bouaoudja
الإعداد
Hind Laouamri

الاقتباسات الببليوغرافية

APA

Hind Laouamri،M. Kolli و N. Bouaoudja. (2016). Caractérisation des couches déposées par pulvérisation sur un verre sablé revenue par une couche transparente : application de la méthode sol gel. أطروحة(رسائل دكتوراة). معهد البصريات والميكانيكا الدقيقة-جامعة فرحات عباس - سطيف1. الجزائر.

MLA

Hind Laouamri،M. Kolli و N. Bouaoudja. Caractérisation des couches déposées par pulvérisation sur un verre sablé revenue par une couche transparente : application de la méthode sol gel. 2016. معهد البصريات والميكانيكا الدقيقة-جامعة فرحات عباس - سطيف1، رسائل دكتوراة.