Commande d’une architecture de téléopération par la carte FPGA
Hocine Khati, Rabah Mellah
كلية هندسة الكترونية ومعلومات-جامعة مولود معمري - تيزي وزو · الجزائر
الموضوعات
علوم تطبيقية وتكنولوجية
الملخص
Dans ce travail de thèse, nous avons élaboré un nouveau schéma de commande bilatérale basé sur FPGA pour un système de téléopération à un degré de liberté. Un contrôleur neuro-flou adaptatif est développé pour les systèmes maître et esclave afin de contrôler la position et le couple en fonction de chaque stratégie de commande adoptée (position-position ou quatre canaux). L'apprentissage du réseau neuro-flou est effectué en ligne, en ajustant les paramètres de la conséquence des règles floues à l'aide d'un algorithme d'apprentissage basé sur les méthodes de la descente du gradient et du filtre de Kalman étendu, et cela en tirant profit du parallélisme de calcul du FPGA et sa fréquence d'échantillonnage élevée. Les contrôleurs proposés sont développés sur l'environnement Simulink de MATLAB et implémentés en utilisant les outils " Fixed-Point Tool " et " HDL Coder ". Une telle méthodologie de conception nous a permis d'obtenir un algorithme précis avec un code VHDL optimal en terme de ressources matérielles consommées, tout en réduisant le temps de conception de l'algorithme. Les résultats expérimentaux obtenus ont démontré l'efficacité des contrôleurs proposés comparant aux contrôleurs classiques PID.
روابط وملفات
التعريف والنوع
- رقم الوثيقة
- ee348ff4-c39f-4ae6-ae5f-7ee163c408d3
- رقم العقد
- 0
- نوع الوسائط
- Crawler
- نوع المحتوى
- الرسائل العلمية
- صيغة المصدر
- رسائل دكتوراة
- نوع الملف
- pdf text
- أسماء الملفات
- 1038557_1.pdf
بيانات النشر
- ألقاب المؤلفين
- [{"name_ar":"Hocine Khati","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"Rabah Mellah","title_ar":"اشراف","title_en":"Supervision"}]
- اللغة
- French
المصدر والدورية
- اسم المصدر
- Commande d’une architecture de téléopération par la carte FPGA
المحتوى والصفحات
- عدد الصفحات
- 0
- ترجمة الملخص
- In this thesis work, we have developed a new FPGA-based bilateral control scheme for a teleoperation system with one degree of freedom. An adaptive neuro-fuzzycontroller is developed for the master and the slave systems in order to control position and torque according to each adopted control strategy (position-position or four-channel). The learning of the neuro-fuzzy network is carried out online, by adjusting the consequence parameters of the fuzzy rules using a learning algorithm based on the methods of the gradient descent and the extended Kalman filter, and this by taking advantage of the FPGA’s parallel computing and its high sampling frequency. The proposed controllers are developed on the Simulink environment of MATLAB and implemented using "Fixed-Point Tool" and "HDL Coder". A such design methodology has resulted in an accurate algorithm with optimal VHDL code in terms of consumed hardware resources while re-ducing the design time of the algorithm. The experimental results have demonstrated the efficiency of the proposed controllers compared to conventional controllers PID
- كلمات الباحثين
- Téléopération, FPGA, HDL Coder, ANFIS, Commande neuro-floue, Filtrede Kalman étendu, Fixed-Point Tool
إشراف وإعداد
- الإشراف
- Rabah Mellah
- الإعداد
- Hocine Khati
الاقتباسات الببليوغرافية
APA
MLA