Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2018 e4f9d743-b520-442c-9ee0-89e2b77acbe0

Modelling CO2-Brine Interfacial Tension using Density Gradient Theory

Mohd Fuad Anwari Che Ruslan, Shuyu Sun

جامعة الملك عبدالله للعلوم والتقنية · السعودية

الموضوعات

علوم بحتة وطبيعية

الملخص

Knowledge regarding carbon dioxide (CO2)-brine interfacial tension (IFT) is important for petroleum industry and Carbon Capture and Storage (CCS) strategies. In petroleum industry, CO2-brine IFT is especially importance for CO2 – based enhanced oil recovery strategy as it affects phase behavior and fluid transport in porous media. CCS which involves storing CO2 in geological storage sites also requires understanding regarding CO2-brine IFT as this parameter affects CO2 quantity that could be securely stored in the storage site.Several methods have been used to compute CO2-brine interfacial tension. One of the methods employed is by using Density Gradient Theory (DGT) approach. In DGT model, IFT is computed based on the component density distribution across the interface. However, current model is only applicable for modelling low to medium ionic strength solution. This limitation is due to the model only considers the increase of IFT due to the changes of bulk phases properties and does not account for ion distribution at interface.In this study, a new modelling strategy to compute CO2-brine IFT based on DGT was proposed. In the proposed model, ion distribution across interface was accounted for by separating the interface to two sections. The saddle point of tangent plane distancewhere ( ) was defined as the boundary separating the two sections of the interface. Electrolyte is assumed to be present only in the second section which is connected to the bulk liquid phase side.Numerical simulations were performed using the proposed approach for single and mixed salt solutions for three salts (NaCl, KCl, and CaCl2), for temperature (298 K to 443 K), pressure (2 MPa to 70 MPa), and ionic strength (0.085 mol·kg-1 to 15 mol·kg-1). The simulation result shows that the tuned model was able to predict with good accuracy CO2-brine IFT for all studied cases. Comparison with current DGT model showed that the proposed approach yields better match with the experiment data.In this study, the thermodynamic properties were computed using Cubic Plus Association (CPA) equation of state, and the electrolyte contribution was accounted for by adding Debye-Huckel activity coefficient in the thermodynamic properties computation.

التعريف والنوع

رقم الوثيقة
e4f9d743-b520-442c-9ee0-89e2b77acbe0
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
1699213_1.pdf

بيانات النشر

ألقاب المؤلفين
[{"name_ar":"Mohd Fuad Anwari Che Ruslan","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"Shuyu Sun","title_ar":"اشراف","title_en":"Supervision"}]
اللغة
English

المصدر والدورية

اسم المصدر
Modelling CO2-Brine Interfacial Tension using Density Gradient Theory

المحتوى والصفحات

عدد الصفحات
0
كلمات الباحثين
Carbon dioxide , cubic plus association , Density gradient theory , Interfacial

إشراف وإعداد

الإشراف
Shuyu Sun
الإعداد
Mohd Fuad Anwari Che Ruslan

الاقتباسات الببليوغرافية

APA

Mohd Fuad Anwari Che Ruslan و Shuyu Sun. (2018). Modelling CO2-Brine Interfacial Tension using Density Gradient Theory. أطروحة(رسائل ماجيستير). جامعة الملك عبدالله للعلوم والتقنية. السعودية.

MLA

Mohd Fuad Anwari Che Ruslan و Shuyu Sun. Modelling CO2-Brine Interfacial Tension using Density Gradient Theory. 2018. جامعة الملك عبدالله للعلوم والتقنية، رسائل ماجيستير.