Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 1970 10203

Optimum Conditions For the Production of Brasses of 200 m & 250 m diameters by Using the semicontinuous casting technique in the factory 63

حلحالات القصوى لانتاج النحاس ذو القطر 200 و 250باستخدام عملية الصب النصف مستمر في مصنع 63

رزق طه شبانة

معهد التبين للدراسات المعدنية · مصر

الموضوعات

علوم بحتة وطبيعية

العلوم الاجتماعية › العلوم الاقتصادية › الانتاج › الصناعة · العلوم التطبيقية والتكنولوجيا › الصناعات › صناعات المعادن غير الحديدية › اشغال النحاس

الملخص

A scientific study concerned with the optimum conditions for the production of brasses of 200 mm and 250 mm diameters by the semi-continuous casting technique used if factory 63.The study deals with this problem practically and theoretically. It containes a theoretical background sorting facts ad information. it Also discusses the melting and casting technique used in the factory and describes the materials used, and also the economical side of the project was studied. Another part of the study is devoted to experiments and analysis of data and other measurements.

روابط وملفات

التعريف والنوع

رقم الوثيقة
10203
رقم المصدر
122300
رمز المصدر
BK00010203-001
رقم العقد
340
نوع الوسائط
AskZad
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
ورقي
أسماء الملفات
11223000001.pdf

بيانات النشر

ترجمة العنوان
حلحالات القصوى لانتاج النحاس ذو القطر 200 و 250باستخدام عملية الصب النصف مستمر في مصنع 63
ألقاب المؤلفين
[{"name_ar":"Mohamed A Okasha","name_en":"Mohamed A. Okasha","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"رزق طه شبانة","name_en":"Rezq Taha Shabana","title_ar":"مؤلف","title_en":"Author"}]
اللغة
Arabic

المصدر والدورية

اسم المصدر
Optimum Conditions For the Production of Brasses of 200 m & 250 m diameters by Using the semicontinuous casting technique in the factory 63

المحتوى والصفحات

عدد الصفحات
170
رقم الجزء
0
أبعاد الوثيقة
22 × 30
الموضوعات الرئيسية
العلوم الاجتماعية › العلوم الاقتصادية › الانتاج › الصناعة · العلوم التطبيقية والتكنولوجيا › الصناعات › صناعات المعادن غير الحديدية › اشغال النحاس
كلمات مفتاحية
اشغال النحاس · الصناعة
التصنيف العام
متخصص

إشراف وإعداد

الإشراف
Mohamed A Okasha

جدول المحتويات

a- Preface
 2
 B- Theoritical part
 9 Chapter 1: brasses and its melting practice
 9 Chapter 2: Solidification of metals and laws governing it
 16 Chapter 3: General factors affecting the production of sound castings
 29 Chapter 4: Semi-continuous casting machine
 45 Chapter 5: Metallurgical fundamentals of the semi-continuous casting of non-ferrous metals and the laws govering it
 74 Chapter 6: Most probable defects in ingot casting
 88
 C- Practical part
 95 Chapter 7: Production of brasses in factory 63
 95 Chapter 8: Economical discussion and necessity for reviewing the technique
 102 Chapter 9: The experiments and its tabulation, the results and the deduction
 118
 Summary and conclusion
 5
 References
 170

الاقتباسات الببليوغرافية

APA

Mohamed A Okasha و رزق طه شبانة. (1970). Optimum Conditions For the Production of Brasses of 200 m & 250 m diameters by Using the semicontinuous casting technique in the factory 63. أطروحة(رسائل ماجيستير). معهد التبين للدراسات المعدنية. مصر.

MLA

Mohamed A Okasha و رزق طه شبانة. Optimum Conditions For the Production of Brasses of 200 m & 250 m diameters by Using the semicontinuous casting technique in the factory 63. 1970. معهد التبين للدراسات المعدنية، رسائل ماجيستير.