Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2018 0d4dd649-aa88-4b9a-9ffd-8ef590a68336

Design of A Fault-Tolerant Active Power Filter With Active and Reactive Power Injection Capability Using Multi-Level Inverter and Photovoltaic Array

تصميم مرشح قدرة فعال له القدرة على توليد طاقة فعاله وغير فعالة واستمرارية في العمل في حال حدوث أخطاء باستخدام عاكس كهربائي متعدد المستويات وخلايا شمسية

أمين ماضي, كامل صالح

كلية الدراسات العليا-جامعة النجاح الوطنية · فلسطين

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

The increasing use of nonlinear loads leads to increase the harmonic pollution in the main power system. Harmonics cause many power quality problems such as voltage distortions at Point of Common Coupling (PCC), changing peak-value and RMS-value of line current which will cause addition losses, overloading and overheating, failure of some electrical equipments as transformers, capacitors, and motors, circuit breakers will trip frequently, and damage fuses. Moreover, harmonics may cause interfering with telecommunication lines; therefore, the power quality will be affected. This thesis suggests a solution for this power quality problem through designing multitask active power filter which have the ability to mitigate harmonics, inject reactive power, improve power factor, inject real power and tolerate open circuit fault. The filter was designed and tested using MATLAB software and the results show improving in power quality. The Total Harmonic Distortion (THD) decreased from 13.9% to 3.9% after activating the APF and the power factor becomes nearly 1.0. The APF was tested during open circuit fault (one leg disconnected) and the result was acceptable because the THD decreased from 42% to 8.4% which mean that the filter has the ability to work under fault condition with minimum possible distortion.

التعريف والنوع

رقم الوثيقة
0d4dd649-aa88-4b9a-9ffd-8ef590a68336
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
1611904_1.pdf

بيانات النشر

ترجمة العنوان
تصميم مرشح قدرة فعال له القدرة على توليد طاقة فعاله وغير فعالة واستمرارية في العمل في حال حدوث أخطاء باستخدام عاكس كهربائي متعدد المستويات وخلايا شمسية
ألقاب المؤلفين
[{"name_ar":"أمين ماضي","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"كامل صالح","title_ar":"اشراف","title_en":"Supervision"}]
اللغة
English

المصدر والدورية

اسم المصدر
Design of A Fault-Tolerant Active Power Filter With Active and Reactive Power Injection Capability Using Multi-Level Inverter and Photovoltaic Array

المحتوى والصفحات

عدد الصفحات
0

إشراف وإعداد

الإشراف
كامل صالح
الإعداد
أمين ماضي

الاقتباسات الببليوغرافية

APA

أمين ماضي و كامل صالح. (2018). Design of A Fault-Tolerant Active Power Filter With Active and Reactive Power Injection Capability Using Multi-Level Inverter and Photovoltaic Array. أطروحة(رسائل ماجيستير). كلية الدراسات العليا-جامعة النجاح الوطنية. فلسطين.

MLA

أمين ماضي و كامل صالح. Design of A Fault-Tolerant Active Power Filter With Active and Reactive Power Injection Capability Using Multi-Level Inverter and Photovoltaic Array. 2018. كلية الدراسات العليا-جامعة النجاح الوطنية، رسائل ماجيستير.