Extraction of Sennosides from Senna Pods

الموضوعات

علوم بحتة وطبيعية

الملخص

This study about Senna alexandrina (Mill) extract, conducted at the Department of Chemical Engineering, Faculty of Engineering, University of Khartoum, beside the use of the laboratories of the Institute of Medicinal and Aromatic Plants, at the National Research Council.A set of experiments had been done to investigate the Sennosides yield using different types of extraction, solvent polarities, particle size and quantity of solvent used. It was found that the yield was high when using Batch extraction compared to Continuous extraction at different levels of Ethanol polarities (concentrations), the particle size which gave the highest yield was 0.6mm mesh size and the optimum quantity of solvent to be used was 100ml for 10gm of grinded Senna pods.The study revealed that the maximum yield of Sennosides is extracted from Senna alexandrina (Mill) when using 50% Ethanol, 0.6mm mesh size as particle size in batch extraction process for ten hours time of contact. The production cost of the Senna extract of 9% Sennosides content was found to be 1.9$/kg.+

روابط وملفات

التعريف والنوع

رقم الوثيقة

0ce8a2b0-d4d5-40ff-8171-56af84ea9901

رقم العقد

0

نوع الوسائط

Crawler

نوع المحتوى

الرسائل العلمية

صيغة المصدر

رسائل ماجيستير

نوع الملف

pdf text

أسماء الملفات

890528_1.pdf

بيانات النشر

ألقاب المؤلفين

[{"name_ar":" Abel Shakour Awad El Karim","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"Hammad Mudather Mustafa Behery","title_ar":"اعداد","title_en":"Preparation"}]

اللغة

English

المصدر والدورية

اسم المصدر

Extraction of Sennosides from Senna Pods

المحتوى والصفحات

عدد الصفحات

0

إشراف وإعداد

الإشراف

Abel Shakour Awad El Karim

الإعداد

Hammad Mudather Mustafa Behery

الاقتباسات الببليوغرافية