رسائل ماجيستير
العربية
2011
088ca628-56f8-4d02-9e61-4fdd8eac1218
تطوير آلة بذار القمح لتناسب الزراعة في الأراضي الطينية
Development of Wheat Seeder Appropriate to Agriculture in Clay Soils
إبراهيم حوراني, نوار قاضي, وائل السلوم
كلية الهندسة الميكانيكية-جامعة حلب · سوريا
الموضوعات
علوم تطبيقية وتكنولوجية
روابط وملفات
التعريف والنوع
- رقم الوثيقة
- 088ca628-56f8-4d02-9e61-4fdd8eac1218
- رقم العقد
- 0
- نوع الوسائط
- Crawler
- نوع المحتوى
- الرسائل العلمية
- صيغة المصدر
- رسائل ماجيستير
- نوع الملف
- pdf text
- أسماء الملفات
- 1967783_1.pdf
بيانات النشر
- ترجمة العنوان
- Development of Wheat Seeder Appropriate to Agriculture in Clay Soils
- ألقاب المؤلفين
- [{"name_ar":" إبراهيم حوراني","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":" نوار قاضي","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"وائل السلوم","title_ar":"اشراف","title_en":"Supervision"}]
- اللغة
- Arabic
المصدر والدورية
- اسم المصدر
- تطوير آلة بذار القمح لتناسب الزراعة في الأراضي الطينية
المحتوى والصفحات
- عدد الصفحات
- 0
- ترجمة الملخص
- The importance of this research, which aims to the development of traditional seeder machine to suit the soil conditions of the northern region of Syria, a heavy clay soil, which is exposed during the process of seed in the soil and in particular the container on the remnants of an earlier crop of many of the problems of them. The study included a practical impact both of the following variables on germination percentage and rate of distribution of seeds in the soil: the depth of tillage, the angle of fall of seeds from the slots feed with the horizon, the distance between the holes feed, the form of weapon plow used to cover the seed, the speed of progress machine, feed rate of seeds, the distance between the plows, horizontal distance between the slot feed and plow, and the high slot seeds fall from the earth. The study concluded the following results: The developed machine achieved good results where the percentage of germination of 93%, and uniform distribution of plants, and high-yield reached 86.7%. The optimal distance between the plow and feed slot is 50 cm. The optimal angle of the fall of the seed of the feed slots is 60 °. The optimum height of the feed holes from the ground is 50 cm. For the distance between the feed slots is 17 cm, at the speedof the process of sowing of wheat crop 8km/hr. Also found that the use of a weapon with duck wings gave the best results.
إشراف وإعداد
- الإشراف
- نوار قاضي, وائل السلوم
- الإعداد
- إبراهيم حوراني
الاقتباسات الببليوغرافية
APA
إبراهيم حوراني، نوار قاضي و وائل السلوم. (2011). تطوير آلة بذار القمح لتناسب الزراعة في الأراضي الطينية. أطروحة(رسائل ماجيستير). كلية الهندسة الميكانيكية-جامعة حلب. سوريا.
MLA
إبراهيم حوراني، نوار قاضي و وائل السلوم. تطوير آلة بذار القمح لتناسب الزراعة في الأراضي الطينية. 2011. كلية الهندسة الميكانيكية-جامعة حلب، رسائل ماجيستير.