Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2020 07133022-e2b0-484d-a16b-b2e8c2bb8735

Effects of Injector Parameters on Diesel Engine Performance and Exhaust Emissions by Using Simulation Software

تأثير متغيرات الحاقن على أداء محرك الديزل وإنبعاثات العادم بإستخدام برنامج محاكاة

ابوبكر يوسف الطيب فضل السعيد, خالد عبدالوهاب عمر

كلية الدراسات العليا-جامعة السودان للعلوم والتكنولوجيا · السودان

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

The phenomenon of global warming is one of the most important problems facing us at the present time, which has not been treated so far, and that the root cause of this phenomenon is the greenhouse gases surrounding the globe, and hence the aim was to reduce the rates of these gases and know the causes of the occurrence and attempts To reduce or minimize these causes. Emissions from motor vehicles and power plants are one of the main reasons for the presence of greenhouse gases, so there has to be a solution that reduces these emissions, and here are the emissions from motor vehicles in general and diesel engine in particular. The engine was tested to reduce its emissions, and the method used was to adjust the fuel injector to reduce emissions and increase mechanical efficiency. A comprehensive study was conducted for these emissions, their different types, causes and ways to reduce them by studying the amount of emissions and mechanical efficiency of one of the diesel machines and then conducting the same study for the same machine, but by changing the injector variables Where at each stage we change one of the variables of the fuel injector in a certain range and installing other variables, at a certain nominal engine speed and compression ratio until we get the lowest amount of emissions and the highest mechanical efficiency as possible. And when entering the values of injector parameters obtained into the Diesel-RK program,it is noted that the value of mechanical efficiency increased from 88.01% to 88.8%, the PM emission decreased from 0.17372 ppm to 0.13187 ppm, CO2 emission decreased from 714.04 g/kWh to 711.67 g/kWh and the value of NOx emission decreased from 1205.2 g/kWh to 805.45 g/kWh.

التعريف والنوع

رقم الوثيقة
07133022-e2b0-484d-a16b-b2e8c2bb8735
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
2188305_1.pdf

بيانات النشر

ترجمة العنوان
تأثير متغيرات الحاقن على أداء محرك الديزل وإنبعاثات العادم بإستخدام برنامج محاكاة
ألقاب المؤلفين
[{"name_ar":"ابوبكر يوسف الطيب فضل السعيد","title_ar":"اشراف","title_en":"Supervision"},{"name_ar":"خالد عبدالوهاب عمر","title_ar":"اعداد","title_en":"Preparation"}]
اللغة
English

المصدر والدورية

اسم المصدر
Effects of Injector Parameters on Diesel Engine Performance and Exhaust Emissions by Using Simulation Software

المحتوى والصفحات

عدد الصفحات
0
كلمات الباحثين
Engineering Mechanical Engineering Effects of Injector Parameters Diesel Engine Performance Exhaust Emissions

إشراف وإعداد

الإشراف
ابوبكر يوسف الطيب فضل السعيد
الإعداد
خالد عبدالوهاب عمر

الاقتباسات الببليوغرافية

APA

ابوبكر يوسف الطيب فضل السعيد و خالد عبدالوهاب عمر. (2020). Effects of Injector Parameters on Diesel Engine Performance and Exhaust Emissions by Using Simulation Software. أطروحة(رسائل ماجيستير). كلية الدراسات العليا-جامعة السودان للعلوم والتكنولوجيا. السودان.

MLA

ابوبكر يوسف الطيب فضل السعيد و خالد عبدالوهاب عمر. Effects of Injector Parameters on Diesel Engine Performance and Exhaust Emissions by Using Simulation Software. 2020. كلية الدراسات العليا-جامعة السودان للعلوم والتكنولوجيا، رسائل ماجيستير.