Schoobrary رجوع
العودة إلى البحث
رسائل ماجيستير الانجليزية 2012 06ad621b-d2d4-46d7-95b2-352b9b39494b

Heavy Metal Removal from Wastewater using Novel Adsorbent

Manal W. Kaakani, Maruf Mortula

كلية الهندسة-الجامعة الأمريكية - الشارقة · الامارات

الموضوعات

علوم تطبيقية وتكنولوجية

الملخص

Heavy metals, when in abundance, can be very toxic to the medium in which it is dissolved. Adsorption has been used as a suitable water treatment process to remove heavy metals. Many studies have been conducted to remove these heavy metals by using different materials. Different materials have different chemical constitutes, hence, a material that is very effective in removing one heavy metal may prove to have a poor efficiency in adsorbing, or removing, another metal. For this research, palm leaves were used as the adsorbent to remove Copper, Chromium, and Zinc from wastewater. The synthetic wastewater was produced in the laboratory to conduct the experiments. Batch tests were conducted to obtain the optimal materials and conditions combinations. The fixed bed column experiments were then followed, as they simulate the filtration process which is the most commonly used in treatment plants for adsorption. Batch tests were conducted to assess the performance of copper removal via adsorption. Different conditions were tested for and included pH, Co, and adsorbent dosage. Results have used Freundlich and Langmuir equations to fit the experimental data so that kinetics of the process can be obtained. It was also shown that Freundlich isotherm was better able to fit the linearized data points than Langmuir with Copper and Zinc, however, neither isotherm was very successful with Chromium. It was concluded that each metal has its own optimal condition that is not fitted with the other metals, although, all conditions produced positive results. Desorption tests confirmed the reusability of the metals and the adsorbent as recovery was sufficient in some places more than others. Further investigations may need to be performed to obtain results on different parameters, adsorbent particle size, contact time, agitation speed, and temperature, etc.

التعريف والنوع

رقم الوثيقة
06ad621b-d2d4-46d7-95b2-352b9b39494b
رقم العقد
0
نوع الوسائط
Crawler
نوع المحتوى
الرسائل العلمية
صيغة المصدر
رسائل ماجيستير
نوع الملف
pdf text
أسماء الملفات
46090_1.pdf

بيانات النشر

ألقاب المؤلفين
[{"name_ar":"Manal W. Kaakani","title_ar":"اعداد","title_en":"Preparation"},{"name_ar":"Maruf Mortula ","title_ar":"اشراف","title_en":"Supervision"}]
اللغة
English

المصدر والدورية

اسم المصدر
Heavy Metal Removal from Wastewater using Novel Adsorbent

المحتوى والصفحات

عدد الصفحات
0

إشراف وإعداد

الإشراف
Maruf Mortula
الإعداد
Manal W. Kaakani

الاقتباسات الببليوغرافية

APA

Manal W. Kaakani و Maruf Mortula . (2012). Heavy Metal Removal from Wastewater using Novel Adsorbent. أطروحة(رسائل ماجيستير). كلية الهندسة-الجامعة الأمريكية - الشارقة. الامارات .

MLA

Manal W. Kaakani و Maruf Mortula . Heavy Metal Removal from Wastewater using Novel Adsorbent. 2012. كلية الهندسة-الجامعة الأمريكية - الشارقة، رسائل ماجيستير.